thanks for the reply, so if I have 2 delta/delta bamks, 1 bank has the power leg connecting to the customer off the x3 bushing and the other bank off the x1 bushing will they parallel
Type: Posts; User: app.john
thanks for the reply, so if I have 2 delta/delta bamks, 1 bank has the power leg connecting to the customer off the x3 bushing and the other bank off the x1 bushing will they parallel
what is the easy way to find out if you can parallel two 3 pot banks together?all of are pots are subtractive and we only hook up delta on the high side.
thanks for all your help,the wire was deadended to a steel tower and we were making the jumpers with the loose tails.
3rd step.We don't do much transmission work,and the lineman was unsure.
thanks for the info, the problem we were having is the wire was birdcaging if we went from the center out, so we tried pressing the end first and went to the center and that worked. hopefully no...
the wire is 715 accr.
when you make your presses on 60 kv do you leave a gap between or do you lap them
between are clearance points there are ten overhead transformers; do you have to open every trans. to work on the line? or is EPZ the pole your working on sufficient.
we had a lineman get injected with hydraulic fluid when the hose burst while making a underground splice. we now use a cover over the hose.
I am a first year app. and trying to figure out how you calculate phase to ground voltages.For ex: 12kv phase to phase is 7200 phase to ground.But when you calculate it out it is different, 12000...